Print this page

Detailed Parts Description

Part Number

BDS:123409

Description

Recoil Traction bar kit, Use with vehicle specific mounting hardware

BDS Suspension

These new RECOIL traction bars are built to the highest standards for the ultimate performance on and off-road. The bars are fabricated from 2" OD x 3/16'' wall steel tubing with a threaded bung welded in toward the axle and a CNC machined end at the frame. The axle mount uses the tried and true BDS large forged flex end and jam nut to take whatever abuse you throw at it. Utilizing a forged housing with large 1-1/4" -12 threaded shank, a single sided snap ring and 1-piece flex ball, the flex ends are capable of up to 15-degrees of misalignment in either direction. At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings. The main spring has a 3000lb spring rate. Both ends are greaseable and serviceable. Fully assembled the RECOIL traction bars are 60" long and mount to the vehicle using fabricated 1/4" steel brackets. Bracket kits are vehicle specific. The mounting brackets are designed for easy bolt-on installation. The traction bars and mounting brackets use a durable gloss black powdercoat finish. These new RECOIL traction bars are built to the highest standards featuring quick and easy adjustment while installed on the vehicle. To adjust spring tension, use the supplied spanner wrenches at the axle to loosen the jam nut. From there the main bar can be rotated to load or unload the springs at the frame side of the bar. Using the concave end of the wrench handle against the frame end check the location of the end of the main bar in relation to the notches on the wrench to verify the load on the springs, the shorter the distance the more loaded the springs are. Repeat this process on the other traction bar and use the wrenches to tighten down the jam nuts and you are ready to go! Join the revolution with the next generation RECOIL traction bars from BDS Suspension.

Image

Picture is for representation only and may not be of the actual part

Retail Pricing

Parts Shipping Information

Weight in lbs.	Dimensions in inches (if Available)	Dimensional Weight	Ship Code
54.1	67.5 x 8 x 4	54.1	2

Vehicles this part fits

1988 to 1999 Chevrolet Chev C/K Truck K1500, Rear, For 0-6 inch Recoil Traction bar kit

1999 to 2018 Chevrolet Silverado 1500 Silverado 1500, Rear, For 0-6 inch Recoil Traction bar kit

2003 to 2018 Dodge Ram 2500/3500 2003-13 Ram 2500, 2003-19 Ram 3500, Rear, Fits 0-6 inch of rear lift Fits 4 inch Rear Axle Models Only Recoil Traction bar kit

2004 to 2023 Ford F150 F-150, Rear, For 0-6 inch Will not work with AMP Research PowerSteps Recoil Traction bar kit

1999 to 2020 Ford Superduty For 0-6 inch Will not work with AMP Research PowerSteps Recoil Traction bar kit

1999 to 2018 GMC Sierra 1500 Sierra 1500, Rear, For 0-6 inch Recoil Traction bar kit

2007 to 2016 Toyota Tundra Tundra, Rear, For 0-6 inch Recoil Traction bar kit

---